Fully automatic loading machines do not stop automatically during production, which can lead to problems in the production process and potential safety risks. Below are some of the reasons and their solutions that may cause a fully automatic loader to not stop automatically:

　　Faulty sensors

　　Automatic loading machines rely on sensors to detect the amount of raw material. If the sensors are faulty, this may result in the loader not being able to correctly determine if it needs to stop. In this case, you need to check the sensitivity and position of the sensors. If the sensor malfunction is severe, you may need to replace it with a new one.

　　Controller failure

　　The controller of the automatic loading machine is its core part, which is responsible for controlling the running and stopping of the machine. If the controller is faulty, it may cause the loading machine to fail to stop automatically. In this case, you need to check whether the controller's operation status is normal. If the controller failure is serious, you may need to replace the controller with a new one.

　　Incorrect operation

　　The operator of the automatic loading machine needs to know the correct operation method. If the operator does not follow the correct steps, the loading machine may not stop automatically. In this case, you need to check whether the operator's operating skills are up to standard. If they are not up to standard, they need to be trained in the correct operating method.

　　Insufficient air pressure

　　Automatic loaders require air pressure to control the operation and shutdown of the machine. If the air pressure is insufficient, the loading machine may not be able to stop automatically. In this case, you need to check whether the air pressure is normal. If the air pressure is insufficient, you need to check the operation status of the air pump and whether the air pressure pipe is leaking.

　　Material blockage

　　The feeding pipe of the automatic feeding machine may be blocked, which may cause the machine can not be stopped automatically. In this case, you need to check whether the loading pipe is free and clear the blocked material. In addition, you need to check and maintain the feeding pipe regularly to avoid similar problems.

　　To sum up, the automatic feeding machine won't stop automatically may be caused by a variety of reasons. In order to solve this problem, you need to double-check the machine's condition and maintenance records to find out the root cause of the problem and take appropriate solutions. At the same time, you also need to train the operators to master the correct operation method and pay attention to the maintenance and care of the machine to keep it in good working condition.