When the sensor of the fully automatic feeding machine malfunctions, the following steps can be taken to solve the problem:

1、 Preliminary examination and diagnosis

Check the power supply and connection: First, confirm whether the power supply of the sensor is connected, whether the power cord is intact, and whether the connection is loose or disconnected. These basic checks can help quickly locate whether sensor failure is caused by power or connection issues.

Observe sensor status: Check for any obvious physical damage to the sensor, such as cracks, fractures, or corrosion. Meanwhile, observe whether there are any foreign objects around the sensor that interfere with its normal operation.

2、 In depth investigation and repair

Circuit troubleshooting: If the initial inspection fails to identify the issue, further inspection of the sensor circuit may be necessary. Use professional tools to check for short circuits, open circuits, or other electrical faults in the circuit.

Mechanical fault handling: Sensor failure may sometimes be caused by damage or looseness of mechanical components. Therefore, it is necessary to carefully inspect the mechanical structure of the sensor to ensure that all components are intact and securely installed.

Environmental considerations: Environmental factors such as temperature, humidity, and dust may also affect the performance of sensors. Ensure that the sensor is in a suitable working environment, avoiding the effects of extreme temperature, humidity, and dust.

3、 Professional maintenance and replacement

Professional maintenance: If the sensor still does not resume normal operation after the above steps, it may be necessary to seek the help of professional maintenance personnel. They have more professional knowledge and tools, which can diagnose problems more accurately and make repairs.

Replace sensor: If the sensor is severely damaged or cannot be repaired, it is necessary to consider replacing it with a new sensor. When replacing, make sure to choose a sensor that is compatible with the device and has good performance.

4、 Preventive measures

To avoid sensor failure, it is recommended to regularly maintain and upkeep the fully automatic feeding machine. This includes cleaning the sensor surface, inspecting the connecting wires and circuits, and performing necessary calibration and adjustments. Meanwhile, it is important to observe the operational status of the sensor during use, and promptly identify and address potential issues.

In summary, when the sensor of the fully automatic feeding machine malfunctions, the problem should be solved through preliminary inspection, in-depth investigation, professional maintenance, and replacement, and effective preventive measures should be taken to reduce the probability of failure.